265 Gallon (1000 L) Stainless Steel Agitated Mixing Tank (Rectangular)
Configuration: Rectangular stainless tank with top-mounted agitator assembly (photos included) Approx. capacity: ~1,000 L (if you require a confirmed volume, I can provide additional measurements) Agitation: Top-entry mixer/agitator with stainless shaft/impeller (see photos) Motor: Baldor industrial motor (nameplate photo included; shows dual-voltage 208–230/460V) Condition: Used; stored on-site; sold as-is/where-is Location: Mill Bay, BC (Canada)
1,900 litres (500 gallons) Stainless Steel Reactor Tank With Mixer
Stainless Steel Reactor Tank With Mixer or about 1,650 litres (440 gallons) filled to 75% of height for mixing. 48”H and 55.5”D The tank and impeller are stainless as are the 3 baffles on the inside of the tank. The baffles could be removed easily. There is no scraper as the tank was designed to be capable of aggressive agitation, so it has a dual impeller set up. 5 HP motor and 3 side outlets.The lid is configured for easy removal if necessary. Location: Burnaby, BC
792 Gal (3000L) Stainless Steel Vertical Insulated tank
792 Gal (3000L) Stainless Steel Vertical Insulated tank used for potable brewery water holding - excellent condition. Dimensions: 55” ID x 62” OD x 92” sidewall OAH 132” -cone bottom and top -1 ½” drain -(2) 1 ½” TC ports only on sidewall -Temp sensor thermowell -(2) 1 ½” inlet pipe near top and in top -Elbow vent top centre -16” top manway c/w dust cover lid -(4) legs Location: Black Creek, Vancouver Island, BC
4,000 Gallon (16,900 L) Stainless Steel Cone-Bottom Fermentation Tank (High-leg FV)
Capacity: 4,000 US gal (approx. 16,900 L / 169 HL) Manufacturer: Ripley Stainless Ltd. (Summerland, BC, Canada) Year: 1995 Material: 304 stainless steel Bottom: Cone-bottom (aggressive cone) Max working pressure: 15 PSI Serial No.: 186 Approx. dimensions: ~6.5 ft diameter × ~18–19 ft tall Approx. weight: ~16,500 lb Condition: Used; one localized dent in the shell (cosmetic only—no puncture/leaks). Mill Location: Mill Bay, BC (Canada)
5,000 Gallon (18,900 L) Insulated Stainless Steel Vertical Tanks
2X available Capacity: approx. 5,000 US gal each Construction: 304 stainless steel, insulated, smooth outer cladding Configuration: Vertical, leg-mounted Features: Large manways and CIP piping (as shown in photos) Approx. dimensions (each): ~7.25–7.5 ft diameter × ~19–20 ft tall Condition: Used; cosmetic wear consistent with age; structurally intact Location: Mill Bay, BC (Canada)
30000 Gallons Mild Steel Horizontal Tank
30000 Gallons Mild Steel Horizontal Tank 12ft in diameter x 36 feet long good condition wall thickness is 1/2" insulated with spray foam and painted for UV protection. has five welded fittings for temp sensors The tank was mfg in 1982 rated for 40 psi and is steel Location: Agassiz BC, 1-1/2 hour out of Vancouver BC