Aesus "Little Filler" Single Head all original parts (nozzles, hoses, foot pedal) * a spares kit that is about $300 value that will be included From ml to Gallons on the same machine The LittleFiller is a unique, compact single headed liquid filling unit capable of combining with and networking up to 4 (or more) heads. soft Touch control screen. * Versatility: A wide variety of products are easily filled, ranging from light liquids through to heavy creams and gels. * Immediately ready to fill again: no need to first draw in the required product prior to dispensing, as is the case with piston fillers. In some applications this will double the output. * Limitless fill quantity: no restrictions regarding the fill size. Milliliters to liters… ounces to gallons… same machine. No separate pistons to buy. * Repeatabilities of +/- 0.5%: easily achievable **. * Changeover: new products can be set up quickly and easily and the complete pump can be disassembled without tools. * The time saved adds up rapidly... helping pay for the machine over and over. * Compact: The fillers take up half the space of others. The LittleFiller LF1 fillers can be networked together to make multi-headed liquid filling systems; just plug each unit into power and connect each unit to each other with a small, readily available ‘Ethernet’ style cable and they are networked. Location: Ontario

The design of the Lenticular housings are on standing 4 legs (it has casters, but these were added but can be removed), closure by stainless steel bolts, sealing by silicone gasket, flat gasket style adapter for modules. There are several benefits of using Lenticular housings. Filtration without product losses due to an enclosed design. The filter requires less space than a standard plate filter due to its vertical design. The houses are simple to load and break down — no need for wetting and re-tightening. The housings can be loaded with as few as one filter model if using the appropriate center post. Also, the filter modules can be back flushed and reused multiple times when using back-flushable modules. The housing can hold 3 filter modules high, 12" diameter (there are no plates, it uses filter modules; we also have fitler modules at 3 microns) it has been used during filtration of our cold brew coffee from 2017 to 2019 filter media was never re-used, so the housing is in great condition Manufactured by Scott Laboratories in 2017 Location: Ontario