658 Gallon (2490 Liter) approx 304 Stainless Steel Vertical Tank Four 4X available 4'D X 7'H Used for 2 days only as a sand filter. Tank is cleaned. 3" top and bottom valves with manhole on top Location: Montreal, QC

840 Gal (2720L) (20HL) Brite 304 Stainless Steel Jacketed Vertical Tank 2340L Working Volume @15 psi Glycol Jacket @40 psi Location: Eastern Provinces, Canada

970 gallon (3600L) approx, vertical, stainless steel jacketed (heating 3.25" thickness) processor tank 84"H X 56"OD top manhole with 15.5" opening. Side baffles inside with propeller near base. The Lightnin' agitator is 3HP, with a 14.3 ratio and output of 125 rpm. Serial# of the agitator is 7908164 and the model is 71-0-3. Previous use: liquid spice blend No water level switch or sensor Tank has no legs. It is currently supported in deck flooring. The inlet and outlet piping are both 2” There are 3 vent holes at top, which includes two 1” vent one 3” vent. Location: Greater Toronto Area

1000 L (265 Gal) Stainless Vertical Tank with hand operated mixer Open Top Food Grade 53"H (plus 8" Cone) X 45"D Mfg: Liquid Carbonic Location: Burlington, ON Canada

1680 Gallon (40 bbl) Brite Vertical Stainless Steel Tank Total Capacity: 44 bbl Dimensions: Total height: 3840 mm (12’ 7”) Internal Diameter: 1500 mm (4’ 11”) Outside Diameter: 1600 mm (5’ 3”) Technical Characteristics: Operating pressure: 14.9 psi maximum Stainless steel shell, 304/2B finish, 2 mm thick Domed top, 3 mm thick Dished bottom, 3 mm thick #2 – Dimpled glycol jacket, 26.6” H (600 mm), positioned on the side of vessel #1 – Dimpled glycol jacket, 47” H (1200 mm), positioned on the side of vessel High density insulation, 2” Stainless steel clad, 1.5 mm thick, on side of vessel (full welded) Stainless steel clad, 1.5 mm thick, on bottom of vessel (full welded) Stainless steel legs with adjustable floor pads Side manway, “shadowless” Dual scale thermometer with thermowell Thermowell for probe positioning Sampling valve, “Perlick” Racking outlet, 1.5" TRC Total discharge, 1.5" TRC Vacuum/pressure relief valve, 2" tri-clamp NPT fitting for glycol inlet/outlet CIP arm, 1.5", with removable spray ball assembly Sight gauge with CIP connection #1 – CO2 carbonating stone #2 – CO2 valve, ¼” complete with pressure gauge #2 – Lifting lugs 2-1.5” TC butterfly valves 2-1.5” TC clamps 2-1.5” TC gaskets Condition: Used-Like New Location: Nova Scotia, Canada

2640 Gallon (10000 L) Vertical 304 Stainless Steel Tank 7' D X 11' H Built: 2012 Atmospheric Pressure Non Jacketed Last Use: Grapefruit Oil Location: Montreal, QC

Tank One 8' 6" Diameter and 26' long (approx 11,000 Gal) Tank Two 9' Diameter and 21' long (approx 10,000 Gal) The tanks have Hot Oil Coils in them and worked well till they were taken out of service. The tanks are asphalt cement storage tanks.a When we were changing them out we drained all the Asphalt Cement AC we could out while it was 300' F. There is some on the walls and bottom of tank. The coils were drained of thermal oil as best possible and then all were capped off. That is there current condition the AC in tanks sets up once cool and is stable. The only use for these tanks are for asphalt storage. Location: Southwestern Ontario

10000/11000 Gal Asphalt/Cement Steel Storage Tanks Horizontal Tank One 8' 6" Diameter and 26' long Tank Two 9' Diameter and 21' long. The tanks are asphalt cement storage tanks. All the Asphalt Cement AC was drained while it was 300' F. There is some on the walls and bottom of tank. The tanks have Hot Oil Coils in them and worked well till they were taken out of service The coils were drained of thermal oil as best possible and then all were capped off. The AC in tanks sets up once cool and is stable. All is as is where is subject to detailed inspection. Location: Southwestern London, Ontario area